Make a series letters from the LED
Make a series letters from the LED , Things to consider before making the sign of the LED array, 1) Use LED nodes. 2) Paint the top of the PCB with a dark color (black). 3) Note the LED specifications. In this experiment use a 5mm diameter LED nodes that emit red, specification voltage of 3 volts. The assembly of LED: 1) One letter composed at most 5 columns and 7 rows. 2) One column mostly composed by 6 LEDs are arranged series. 3) Then the fifth column are connected in parallel. 4) Each column given the constraints, Rx, which amount depends on the number of LEDs in one column and depends also on the type of LED (in this experiment that used LED 5mm in diameter, clear with red light beam). 5) In a column consisting of 6 LEDs, Rx = 330 ohm, 5 LEDs, Rx = 560 Ohms, 4 LEDs, Rx = 680 Ohms Remember, this provision applies to 5 mm LED red light beam nodes. 6) Every letter was given FCS9013 transistor amplifier. Here is one letter LED scheme. Medium picture below is the lay out of the 2-lette...